Call them what you will (Product Specification Sheets, Cut Sheets, or Submittal Sheets), use these editable.pdf forms to build a unique Solatube product description number for each type of Solatube Daylighting System used in your building’s design. *NOTE: In order to save a cut sheet you fill out, you may need the full version of Adobe Acrobat and not the free reader.

The BIM Object(s) below are filled with data and they can easily be downloaded and customized for your residential or commercial project.

 

NOTE: The secondary files -.dwg, DWF, DXF, and DGN are all CAD Files and you will need AutoCAD or Bentley to open and view these. The DWF file is a protected 3D version of the Revit file, which some refer to as a 3D pdf file.

Solatube International offers an extensive library of photometric data files for every product configuration for over 130 site locations.Please contact your Solatube Representative to get the files most appropriate for your lighting design.
Click here to find a daylighting expert in your area

 

 

 

The sealant is a hazardous substance. Please use extreme caution. See the attached Material Safety Data Sheets (MSDS) for information before opening.
All other components (“articles”) fall under the Occupational Safety and Health Communication Standard 1910.1200 which indicates at Section 1910.1200(b)(6) that, other than for the sealants used during Solatube® skylight installation, none of the other parts (“articles”) used in the Solatube® skylight pose a health risk and do not require a Material Safety Data Sheet. (See the Occupational Safety and Health Communication Standard 1910.1200 reference below.)

Occupational Safety and Health Communication Standard 1910.1200(b)(6)(v)
Paragraph c
"Article" means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical (as determined under paragraph (d) of this section), and does not pose a physical hazard or health risk to employees.